Feasibility Study of Wind Energy Harvesting at TELCO Tower in Malaysia


Abstract views: 196 / PDF downloads: 246

Authors

  • Siow Chun Lim Multimedia University
  • Tong Jia Meng
  • Chinnasamy Palanichamy
  • Gan Tian Eng

Abstract

As the stride towards 5G intensifies in Malaysia, more Base Transceiver Stations (BTS) will be erected to fulfill the infrastructural needs. BTS tend to be built in isolated areas rendering tapping power from the main grid to be an economically unpleasant option. In Malaysia, the potential of wind energy as an energy source is largely untapped due to the relatively low average wind speed. However, BTS may not need a huge amount of power to function. Hence, this paper investigates the feasibility of application of small wind turbines (SWT) to fulfill the power needs of a typical BTS. The power consumption of a typical BTS would first be estimated followed by estimation of the power yield of few commercially available SWT's. Based on available wind data, it was found that the power generated from SWT is insufficient to match the power demand of a typical BTS.Keywords: Small Wind Turbine, Wind Energy, Base Transceiver StationJEL Classifications: Q42, Q47, Q56DOI: https://doi.org/10.32479/ijeep.8106

Downloads

Download data is not yet available.

Author Biography

Siow Chun Lim, Multimedia University

Programme Coordinator,Electrical Engineering Programme, Faculty of Engineering,Multimedia University

Downloads

Published

2019-10-04

How to Cite

Lim, S. C., Meng, T. J., Palanichamy, C., & Eng, G. T. (2019). Feasibility Study of Wind Energy Harvesting at TELCO Tower in Malaysia. International Journal of Energy Economics and Policy, 9(6), 277–282. Retrieved from https://econjournals.com/index.php/ijeep/article/view/8106

Issue

Vol. 9 No. 6 (2019)

Section

Articles

License

Submission of an article implies that the work described has not been published previously , that it is not under consideration for publication elsewhere, that its publication is approved by all authors and tacitly or explicitly by the responsible authorities where the work was carried out, and that, if accepted, will not be published elsewhere in the same form, without the written consent of the Publisher. The Editors reserve the right to edit or otherwise alter all contributions, but authors will receive proofs for approval before publication.